Journal Publications
# Equally contributed first authorship / *corresponding author
Manuscripts in preparation (2024)
Jun Young Choi#, Sungjin Hong#, J. H. Jeon#*, Geun Young Kim, Jennifer Callanga, Cheonghwa Lee, Sung-Hoon Ahn* “Effect of Angular Laser Texturing and Thermomechanical Joining on the Adhesive Strength of Steel-Milled Carbon and Glass Fiber-Reinforced Vitrimer Composites”
Jun Young Choi#, J. H. Jeon#*, Geun Young Kim, Jennifer Callanga, Cheonghwa Lee, Sung-Hoon Ahn* “Enhancing the Precision of Extremely Long Discontinuous Fiber Deposition in Composites with Vitrimer as the Matrix.”
J. H. Jeon*, A. Rashid, N. Panpalia, S. Melkote “Quantifying Synergistic Effects in Hybrid Post Processing of Additively Manufactured Metal Surfaces: Ultrasonic Cavitation Peening and Electrochemical Polishing Setup Considerations”
2024
J. Y. Choi, J. H. Jeon*, S. H. Ahn* “Repairability of Rubber-backed Vitrimer Composites under Variations of Impact Damage” (Composites Communications, Under Review, 08/2024)
A. Kota*, N. Shanghavi, J. H. Jeon, S. Melkote “Enhancing the Properties of a Low Carbon Steel and SS316L Bimetallic Interface via Mesoscale Groove Engineering in Hybrid Wire-Arc Directed Energy Deposition (Journal of Manufacturing Processes, Under Review, 06/2024)
A. Rashid*, J. H. Jeon, D. Boeing, S. Melkote* “Effect of Machining-Induced Deformation and Grain Refinement on Microstructure Evolution in Hybrid Wire Arc Directed Energy Deposition” (Journal of Manufacturing Science and Engineering, Under Review, 05/2024)
J. H. Jeon#, J. Y. Choi#, G. Y. Kim, C. Lee, J. Callanga, S. Melkote, S. H. Ahn* “Assessment of Recycling and Repair Methods for Discontinuous Glass Fiber Reinforced Vitrimer Composites with Reclaimed Parts” (Manufacturing Letters – NAMRC 52 2024, Accepted, 03/2024)
J. H. Jeon#, J. Y. Choi#, G. Y. Kim, S. Hong, J. Callanga, C. Lee, T. Gries, S. H. Ahn* “Influence of Laser Texturing and Thermomechanical Joining on the Bond Strength of Steel-Flax Fiber Reinforced Vitrimer Composites: A Parametric Study” Journal of Manufacturing Processes 2024
J. H. Jeon*, N. Panpalia, A. Rashid, S. Melkote, “Effect of Electropolishing on Ultrasonic Cavitation in Hybrid Post-Processing of Additively Manufactured Metal Surfaces” Journal of Manufacturing Processes 2024
J. H. Jeon*, S. H. Ahn, S. Melkote, “In-situ analysis of the Effect of Ultrasonic Cavitation on Electrochemical Polishing of Additively Manufactured Metal Surfaces” Journal of Manufacturing Science and Engineering 2024
J. K. Heo, Kausthubharam, M. Y. Jung, W. J. Kim, S. W. Jeong, D. S. Song, Y. J. Quan, J. H. Jeon, R. M. Rodrigo, S. H. Ahn*, “Scaling Effects of Manufacturing Processes and Actuation Sources on Control of Remotely Powered Microactuators” International Journal of Robotics Research 2024
2023
J. H. Jeon#, C. K. Yoon#, J. Y. Choi, K. K. Kuam, S. J. Hong, Y. J. Quan, S. H. Ahn*, “Effect of Fiber Entanglement in Chopped Glass Fiber Reinforced Composite Manufactured via Long Fiber Spray-up Molding” Heliyon 2023
J. Y. Choi#, J. H. Jeon#, J. H. Lyu, J. W. Park, G. Y. Kim, S. Y. Chey, Y. J. Quan, B. Bhandari, B. G. Prusty, S. H. Ahn*, “Current Applications and Development of Composite Manufacturing Processes for Future Mobility” International Journal of Precision Engineering and Manufacturing-Green Technology 2022
2018 – 2022
Y. J. Quan, S. H. Min, S. J. Hong, W. J. Kim, J. H. Jeon, S. H. Ahn*, “A camera-based real-time sensing of structural color-based sensor” Advanced Materials Technologies 2022
K. K. Kwon, Y. J. Quan, J. H. Jeon, D. S. Song, S. H. Ahn*, (2022). “Crackless glass through-structure fabrication with laser-induced backside wet etching using detachably bonded cover” CIRP Annals –Manufacturing Technology 2022
C. K. Yoon, S. J. Ko, J. H. Jeon, W. I. Lee*, “Effect of ammonium polyphosphate and acrylic acid on NaCl treated electrospun PLA microfiber mat” Polymer Engineering and Science 2020
J. H. Jeon, C. K. Yoon, S. H. Park, S. M. Kim*, “Assessment of Long Fiber Spray-up Molding of Chopped Glass Fiber Reinforced Polydicyclopentadiene Composites” Fibers and Polymers 2020
J. H. Jeon, W. I. Lee, J. M. Choi, S. W. Choi*, “Analysis of Cryogenic Impact Properties for a GlassFiber-Reinforced Dicyclopentadiene with a Different Amount of Decelerator Solution” Materials 2019
H. M. Yoo, J. H. Jeon, M. X. Li, W. I. Lee, S. M. Kim*, “Analysis of curing behavior of endo-dicyclopentadiene using different amounts of decelerator solution” Composites Part B: Engineering 2018
Conference Presentations
J. H. Jeon, N. Panpalia, A. Rashid, S. Melkote*, “Effects of Electropolishing and Ultrasonic Cavitation in Hybrid Post-Processing of Additively Manufactured Metal Surfaces” CIRP STC-E, 2024
J. H. Jeon*, S. H. Ahn, S. Melkote, “In-situ analysis of the Effect of Ultrasonic Cavitation on Electrochemical Polishing of Additively Manufactured Metal Surfaces” MSEC 2024
J. H. Jeon*, N. Panpalia, A. Rashid, S. Melkote, “Effect of Electropolishing on Ultrasonic Cavitation in Hybrid Post-Processing of Additively Manufactured Metal Surfaces” NAMRC 52, 2024
J. H. Jeon#, J. Y. Choi#, G. Y. Kim, C. Lee, S. Melkote, S. H. Ahn* “Towards Circular Composites: Recycling and Repair of Glass Fiber Reinforced Vitrimer Composites with Reclaimed Parts” NAMRC52 2024
J. Y. Choi, J. H. Jeon, C. H. Lee, R. Moura, J. Callanga, S. H. Ahn* “Fabrication of discontinuous fiber reinforced vitrimer composites for multi-cycle recycling” Korean Society for Precision Engineering 2023
J. H. Jeon, J. Y. Choi, Y. J. Quan, S. H. Ahn*, “Analysis of Randomly Distributed Discontinuous Glass Fibers upon Compression Molding” ICEAS 2023
J. Y. Choi, J. H. Jeon, J. H. Lyu, J. W. Park, G. Y. Kim, S. Chey, Y. J. Quan, B. Bandari, B. G. Prusty, S. H. ahn* “Evaluation of Composite Manufacturing Processes for Practical and Eco-friendly Applications in Urban Air Mobility” ICAT 2022
J. H. Jeon, S. H. Choi, S. M. Kim, W. I. Lee*, “Long Fiber Spray-up Molding Optimization of Chopped Glass Fiber Reinforced Polydicyclopentadiene Composites” ICCM 22 2019
J. H. Jeon, G. H. Lee, S. M. Kim, W. I. Lee*, “Application of Long Fiber Spray-up Molding of Chopped Glass Fiber Reinforced Polydicyclopentadiene Composites” KSDME 2019
J. M. Choi, J. H. Jeon, S. W. Choi, J. M. Lee*, “Impact properties of Glass Fiber Reinforced polydicyclopentadiene composites” The Society of Naval Architects of Korea 2018
H. M. Yoo, J. H. Jeon, J. W. Choi, W. I. Lee*, “Optimization of Structural Reaction Injection Molding Process (S-RIM) with Dicyclopentadienee Resin a s Matrix” ICCM 21 2017
S. H. Yum, H. M. Yoo, J. H. Jeon, W. I. Lee*, “Effects of Process Parameters on Particle Filtration during the Liquid Composite Molding Process for Manufacturing Particles-added Composite Materials” ICMME 2017
Patents
J. H. Jeon, W. I. Lee, 2021, “SPRAYING DEVICE OF RESIN IMPREGNATED WITH ULTRA LONG FIBERS AND METHOD OF FABRICATING FIBER REINFORCED PLASTIC USING THE SAME” (No.1020200004437)